How to release electronic parking brake with dead battery Nissan Qashqai

In this article, I will be showing you how to release your Nissan Qashqai electronic parking break with ease. You need to follow a few steps to get the job done.

Pressing the switch causes the motor to tighten the parking brake cable as long as the automobile is not moving. Based on the yaw rate and acceleration sensor data, the tension will be proportional to the vehicle’s tilt. The motor stops when it achieves the desired clamping force and maintains the tension.


The motor turns in the opposite direction until the slack reaches a predetermined value when the switch is pulled up for release. The control module is in charge of all values.

If the brakes are applied while the automobile is moving, the brakes will be applied for as long as the switch is held, then released as soon as the switch is removed. The parking brake system will not work if the battery dies. A specific tool is provided with the jack tools to release the parking brakes manually. Disconnect the plug from the spare tire well, insert the tool, and crank counterclockwise to remove it.

The electronic parking brake system will need to be re-initialized if power has been completely lost or replaced by the control module or motor. Of course, you’ll need a scanner. The parking brake, by the way, works even if the CAN system fails.

Why is Nissan Qashqai electronic handbrake not released?

Corrosion is a significant problem with parking brakes. Cables can corrode due to water and grime. Your parking brake may fail, wires may shatter, and brake pads may cling to the wheels.

To avoid locked brakes, make sure you apply your emergency brake frequently to avoid corrosion. The e-brake may also become stuck. Unless the weather is cold and rainy, your e-brake may have frozen. This may be fixed by starting your car and allowing it to warm up.

If you want to loosen a jammed brake, you can do various things. If it is safe to do so, you can attempt moving the car back and forth or manually going beneath the vehicle to yank the wires.  You may also try repeatedly setting and releasing the brake in the hopes of loosening the brakes. If none of these options work, a tow truck may be required.

Nissan Qashqai electronic parking brake system warning light meaning

This light activates the parking brake warning light. It might be red or orange, depending on the vehicle’s manufacturer. It flashes to indicate that the parking or emergency brake is applied and must be disengaged before moving.

It signifies you need to replenish brake fluid if it stays light after the parking brake is released or if it turns on and off sporadically while driving. If the light doesn’t turn off after checking the fluid and adding as needed, you’ll have the braking system examined.

If the brake levels are correct, there is a problem with the system, and the car should be checked by a Nissan specialist as soon as possible. Due to brake failure, driving a car might be unsafe. You may need to have your vehicle towed to a repair facility.


It implies you need to replenish brake fluid if it stays light after you release the parking brake or if it turns on and off sporadically while you’re driving. The braking system will be examined if the indicator does not turn off after checking the fluid and adding as needed.

Even if your braking system isn’t leaking, you’re due for a brake inspection. When your brake pads or shoes wear down, it takes more fluid to force them against the rotors or drums and bring the car to a stop. The center console light may gently inform you that brake repairs and maintenance are approaching.

Nissan Qashqai electronic handbrake hill start

It’s not as difficult as you may believe. It may take some time to get acclimated to the technique, but once you do, you’ll probably find hill starts to be simpler than it has ever been. Push the clutch down and select first gear with your handbrake engaged.

Gently press the accelerator while gradually moving the clutch to the biting point. Disconnect the electronic handbrake while raising the clutch slightly higher when it’s safe to proceed. Continuously build up your acceleration while bringing the clutch up slowly, and you’ll be able to travel up the slope with total control.

Unlike a traditional handbrake, an electric handbrake is controlled by a small button or switch. Instead of using a cable to secure your rear wheels, it uses electronically controlled brake calipers to secure all four of your wheels.


Another significant distinction is that traditional handbrakes must be physically disengaged before moving off. This is still the case with some electronic handbrakes. However, the handbrake will automatically disengage in many new cars as soon as you try to drive away.

This was one of the main reasons electric handbrakes quickly became the standard! Drivers’ lives are made more accessible by them. It’s one less thing to think about, allowing you to focus on your surroundings as you walk away.

How to manually release the parking brake for Nissan Qashqai

Only with the motor running can the parking brake be disengaged. Firmly press down on the brakes. Next, the control should be pressed. The parking brake will be released, and the instrument panel sign will be turned off.

In the case of automatic deactivating, start driving your car. Next, firmly press down on the brakes. Press the accelerator pedal while changing gears to D or R. The parking brake will be released, and the instrument panel sign will be turned off.

How do you use the handbrake on a Nissan Qashqai?

The hand brake, sometimes known as a parking brake, is a hand-operated lever generally positioned on the center console but can occasionally be found between the driver’s seat and the door. The handbrake applies the rear disc pads or brake shoes through a cable when the automobile is parked.

Grip the handgrip, push the button (typically at the end of the grip), then lift the lever to activate it. The brakes are engaged when you raise them, so you’ll feel resistance. The lever is kept in position when you release the button, and a pawl engages on a ratchet plate.

What does the Nissan Qashqai handbrake button replacement cost?

RepairPal estimates the price of replacing a parking brake activation switch. Labor is expected to cost between $51 and $64 per hour, with parts costing $88. That estimate excludes taxes and fees, as well as your particular car and geographic area.

Nissan Qashqai handbrake adjustment step-by-step guide

As a result, we begin our article with a manual Nissan Qashqai’s hand brake adjustment. This method works straightforwardly, with a cable and anchoring screw system that allows you to change the tension with the device and modify the stroke with the handbrake lever.

Follow the steps below to adjust your handbrake:

  • Step one: Using the Torx screws and clips, remove the plastic console that covers your handbrake with the level of your handbrake.
  • Step two: After you’ve completed the procedure, look for a trapdoor in your handbrake and open it to reveal the screw and cable system.
  • Step three: To alter the cable pressure, you’ll need to find the locknuts and loosen them using a tool.
  • Step four: Carefully tighten the lock nuts on both sides, making the exact alterations on both sides to maintain balanced braking, and make sure your Nissan Qashqai’s hand brake lever has a stroke of roughly three notches.
  • Step five: Secure the locknuts and check the locking of your car’s rims; if everything looks good, reassemble the set; if not, adjust the fastening anchoring screws until you have a superb excellent position.

When you can’t get to your Nissan Qashqai’s handbrake flap, any adjustment will almost certainly be the same; however, it will be carried out beneath your automobile at the level of your handbrake lever. Before you take any action, remember to park your vehicles on a platform.


The above article has enlightened us on how to release a brake with a dead battery but with ease.

Don’t forget that it can only be done using a (Nissan Qashqai) handbrake.

The interesting part is that it has provided the manual and electronic parts of releasing the parking brake with a dead battery. This is a unique tool that anyone wouldn’t want to miss out on, and you will be able to travel up the slope with total control.

Scroll to Top